Display

Meaning

Solution

 

 

 

 

 

 

 

 

The one-touch or speed dial location

Dial the number manually with the

 

 

NO. NOT ASSIGNED

you tried to use has no number

keypad, or assign the number.

 

 

 

assigned to it.

 

 

 

 

 

 

 

 

NO PAPER

The recording paper has run out.

Load the recording paper.

 

 

 

 

 

 

SUPPLY PAPER

 

 

 

 

 

 

 

 

 

OVERHEAT

The printer part in your unit has

Please wait until it cools down. If

 

 

overheated.

you cannot solve the problem,

 

 

 

 

please call service.

 

 

 

 

 

 

 

PAPER JAM 0

Recording paper has jammed in

Clear the jam.

 

 

OPEN/CLOSE DOOR

paper feeding area.

 

 

 

 

 

 

 

 

PAPER JAM 1

Recording paper has jammed inside

Clear the jam.

 

 

OPEN/CLOSE DOOR

the unit.

 

 

 

 

 

 

 

 

 

 

 

 

PAPER JAM 2

The jammed paper still remains

Clear the jam.

 

 

CHECK INSIDE

inside the unit.

 

 

 

 

 

 

 

 

 

The remote fax machine you want to

The remote operator should know

 

 

 

 

 

poll is not ready to respond to your

in advance that you are polling

 

3

 

poll.

and have their fax unit loaded

 

 

 

Troubleshooting

POLLING ERROR

Or

with the original document.

 

Enter the correct poll code.

 

 

 

 

When setting up to poll another fax

 

 

 

 

 

 

 

machine, you have used an incorrect

 

 

 

 

poll code.

 

 

 

 

 

 

 

 

 

The toner is almost empty.

Take out the toner cartridge

 

 

TONER LOW

 

machine and gently shake it. By

 

 

 

doing this, you can temporarily

 

 

 

 

 

 

 

 

re-establish printing operations.

 

 

 

 

 

 

 

 

 

 

 

 

 

The toner cartridge has run out .

Replace with a new toner

 

 

TONER EMPTY

The machine stops.

cartridge.

 

 

 

 

 

 

 

 

There occurs a problem in the fuser

Unplug the power cord and plug

 

 

FUSER ERROR

unit

it in again. If you cannot solve the

 

 

 

 

problem, please call service.

 

 

 

 

 

 

 

 

A problem has occurred in the LSU

Unplug the power code and plug

 

 

ENGINE ERROR

(Laser Scanning Unit)

it in again. If you cannot solve the

 

 

 

 

problem, please call service.

 

 

 

 

 

 

 

Troubleshooting 3.7

Page 86
Image 86
Samsung SF-6800 NO. not Assigned, No Paper, Supply Paper Overheat, Paper JAM, OPEN/CLOSE Door, Check Inside, Polling Error