Phonebook Menu
Changing the SIM Memory Entries
To change the SIM memory entry’s information, press the Options soft key.
The following options are available:
Edit number
This option allows you to change the number. You can also add a new number if none has been stored for the selected category.
Change name
This option allows you to change the name of the entry.
To clear the old name, press the C key. For more information about how to enter characters, see page 40.
Send message
This option allows you to send an message to the number. For more information about how to send a message, see page 76.
Copy
This option allows you to copy the entry from the phone’s memory to the SIM card, and vice versa.
Send via infrared
This option allows you to copy the entry from your phone to another device that has the IrDA port via infrared.
Delete entry
This option allows you to delete the entry from Phonebook. To confirm the deletion, press the Yes soft key. Otherwise, press the No soft key.
Phonebook Menu
Add Entry (Phonebook 1.2)
You can store phone numbers and the corresponding names in the memory of your SIM card. In addition, you can store up to 1000 names in the phone memory and each name can be associated with up to five numbers.
1.Enter the number you want to save. Notes:
•If you make a mistake while entering a number, correct it using the C key. For further details, see page 27.
•To insert a dialling pause for special phone services, such as banking by phone, hold down the 
key. “P” is displayed to indicate the pause.
2.When you are sure that the number is correct, press the Save soft key.
3.Select the memory where the number is to be stored, either Phone or SIM, and press the Select soft key.
Note: If you change phones, any numbers stored in your SIM card will automatically be available with the new phone, whereas any numbers stored in the phone’s memory must be stored again.
4.If you select SIM in step 3, go to step 5.
If you select Phone in step 3, choose a number type using the Up or Down key and press the Select soft key.
5.Enter the associated name.
For information about how to enter characters, see page 40.
62 | 63 |
