-Motion is detected only from channels set to ‘On.’
The following screen shows motion recording after motion detection. A motion is deteced in the Channel 1. The ‘M’ mark before the title of each channel indicates that a motion is detected.
[ON/OFF]
8Timer Record Setup
(1)TIMER: Set the Timer to ‘On’ to enable timer recording. [ON/OFF]
(2)DAY: Set the day of the week to record data.
[MON, TUE, WED, THU, FRI, SAT, DAILY, SUN]
(3)START & END: Set the start and ending time of recording. [00:00~23:59]
(4)FIELD RATE: Set the number of fields to record per second. [1/2.5/3.75/7.5/15/30]
