4Remote Controller
1. RECORD
Starts the recording as the setup record setting in normal record mode.
15. SYSTEM ID
Confirms system and remote control ID and changes the remote control ID.
2. ID RESET
The ID is reset.
3. NUMBER KEY
Press to select one of single channels in Live mode. Use this for typing purposes in a numeric input mode.
4. MODE
Selects
5. FREEZE
Runs the FREEZE function in live mode.
6. ZOOM
Press to enlarge the single chan- nel picture to its double.
7. 
(STOP)
Ends search during playback and recording.
8.
FR (fast reverse) : used for quick backwardsearch while in play.
9. MENU
Either goes to the system menu screen or moves to the upper menu from the lower menu.
10.➛
(ENTER)
Shows the cursor for the
channel selection in live mode or used as the select button for menu setup.
16. PIP
In Single mode, press to watch another channel in a sub picture.
17. SEQUNCE
The single channel mode switch- es according to the specified time on the menu.
18.ALARM
Cancels the alarm while the
alarm is going off.
19.
II
Play/Pause : pauses and resumes the search screen while in play.
20 . 
FF(fast forward) : used for quick forward search while in
play.
21.SEARCH
Searches for data on the HDD.
22. 
Used for changing settings or for moving the
23. PWD LOCK
You can check if the password lock (PWD LOCK) is set to ON/OFF.
11. REC LOCK
You can check if REC LOCK is set to ON/OFF.
12 . MONITOR OUT
You can check which mode is set for the current monitor output.
24. SYS INFO.
You can check out information on the system version.
25. CH 3
Displays SINGLE CH 3.
26. CH 4
Displays SINGLE CH 4.
13. CH 1
Displays SINGLE CH 1.
14. CH 2
Displays SINGLE CH 2.
To change the remote control ID
While pressing the SYS ID key, enter the numeric ID in two digits (Default ID: 00).
ex) If you want to change the remote control ID to “08”: While pressing the SYS ID key, enter 0 and 8 and press it again to check if the ID is changed to 08.
English
