Samsung SHR-1040K - page 49

SHR-1040/1040K USER’S MANUAL
English
6-11
(3) RECORD LOCK
If you set RECORD LOCK to ON and press STOP to release the current recording, you are prompted to
enter the PASSWORD.
(4) HDD ERASE
If you exit the Menu after setting HDD ERASE to ON, you will see the following message that asks if you
want to erase the data on the HDD. If you click OK, you’ll see “HDD ERASE” as in the next picture, and the
existing HDD Data is erased. If you click CANCEL, the HDD data will not be erased.
[ON/OFF]
(5) FACTORYRESET
When FACTORYRESET is enabled, the settings are reset to the factory default.
If you exist the menu after setting FACTORYRESET to ON, you’ll see the following mes-
sage that asks if you want to perform FACTORYRESET. If you click OK, the settings are
reset to the factory default with a message of “FACTORYRESET” as in the next picture. If
you click CANCEL, FACTORYRESET will not perform.
[ON/OFF]
Caution
Caution
Deleted data cannot be restored. Check data carefully again before deleting data.
SHR-1040/SHR-1040K-ENG 2006.4.4 11:12 AM ˘ ` 5-11