Samsung SHR-2040P250, SHR-2042P250 manual Transfer Protocol

●Transfer Protocol

-You can change the transfer protocol setting value. The protocol supports TCP/IP and UDP(Unicast, Multicast). Control Port(TCP/IP) and Port(UDP) to alter the connection port. Both Multicast IP and TTL are used for UDP(Multicast).

●Callback

-You can set the Callback function of SHR-2040/2041/2042.

-In the event of Alarm, Motion Detection, or Video Loss, set the IP address and port of PC where SmartViewer is installed to forward Callback messages. In failure of message forwarding, set the value for retrial.

English 9-44