Samsung SIR-T351 manual Digital Ready TV or Normal TV

MD68-00XXXA(E)-CHAPTER 1 4/4/03 10:56 AM Page 14

1 CHAPTER ONE

Connecting The Set Top Box

Digital Ready TV or Normal TV

	Connect an antenna cable to the RF input
1 jacks on the SetTop Box.
2	Connect the Video Cables.
	Digital Ready TV: Connect a video
	cable between the DTV OUT COMPO-
	B R	) jacks on the Set-Top Box and
	NENT (YP P
	the DTV INPUT jacks on the TV.
	Normal TV: Connect a video cable
	between the VIDEO OUT jack on the Set-
	Top Box and the VIDEO INPUT jack on the
	TV. Or, connect an S-Video cable between
	the S-VIDEO OUTPUT jack on the Set-Top
	Box and the S-VIDEO INPUT jack on the
	TV.
3	Connect the Audio Cables
	Digital Ready TV: Connect an audio

cable between the DOLBY DIGITAL OUT (optical or coaxial) jack on the Set-Top Box and the Dolby Digital In jack on the TV. Or, connect an audio cable between the Lt/Rt AUDIO OUT jacks on the Set-Top Box and the L/R AUDIO IN jacks on the TV.

Normal TV: Connect an audio cable between the L/R AUDIO OUT jacks on the Set-Top Box and the L/R AUDIO IN jacks on the TV.

<Digital Ready TV>

< Normal TV>

NOTES

•The TV set must be “digital compatible” (i.e., it must have appropriate audio and digital video terminals).

•If 1080i, 720p, or 480p (DIGITAL) is selected with the RESOLUTION SELECT switch on the Set-Top Box, the On-Screen Display menus will not be supported for VIDEO OUT and S-VIDEO OUT. The OSD menus for VIDEO OUT and S-VIDEO OUT are supported only when 480i (ANALOG) is selected.

•You must set “DTV OUT SELECT (YPBPR /RGB, DVI)” for YPBPR interface.

14