Samsung SIR-TS360 owner manual Adjusting the Raster Picture Centering, Effect

7 CHAPTER 7

Settings, preferences, upgrades, and extras

7 Highlight Time Zone menu item, then press the SELECT button. A list appears from which you can choose your local time zone.

Highlight your Time Zone, then press the SELECT button.

8 The list disappears, and the Time Zone menu item reflects your choice.

9	Highlight the DST Observation menu item, then press the SELECT button.
	A list appears from which you can choose to turn Daylight Savings Time observance on or off.
10		Highlight On or Off, then press the SELECT button.
		The list disappears, and the Status line indicates either DST in effect or Standard time in

effect.

Adjusting the Raster (Picture) Centering

In this menu you can adjust the Raster (picture) on the monitor to be centered. The Raster (picture) centering is only available for RGB/DVI/YPbPr output modes.

1Press the MENU button on your remote control.

2Highlight the Setup menu item, then press the SELECT button.

3Highlight the Installation menu item, then press the SELECT button.

Highlight the Monitor Setup menu item, then press the SELECT

4 button.

5Press Right arrow button to adjust the center of raster (picture).

Press SELECT to move left or right center of raster (picture) on

6 the monitor device.

100