31
CHAPTER 3
Setting up and connecting
3
3

Connecting your DIRECTV®HD Receiver

1Make sure your TV, A/V receiver, and DIRECTV®HD Receiver are turned off and unplugged.
2If you plan to use the DIRECTV®HD Receiver to watch DIRECTV®programming, connect the
RG-6 coaxial cable running from your satellite dish to the SATELLITE IN jack on the back of
your DIRECTV®HD Receiver.
3If you plan to watch cable TV programming, connect the coaxial cable running from your
cable TV system to the CABLE IN jack on the back of the DIRECTV®HD Receiver.
4If you plan to watch off-air TV programming (analog or digital), connect the coaxial cable
running from your off-air TV antenna to the AIR IN jack on the back of the DIRECTV®High-
Definition Receiver.
5Connect the supplied phone cord to a telephone wall jack and to the TEL LINE jack on the
back of the DIRECTV®HD Receiver.
NOTE
Atriple LNB multi-satellite dish antenna including a Sat C LNB is required to receive HD
programming from DIRECTV.
6Make video connections to your TV.
Your DIRECTV®HD Receiver supports the following kinds of video connections:
DVI
RGB
component (Y, PB, PR)
S-Video
composite (standard A/V jacks)