Samsung SIR-TS360 Jacks and cables, Antenna terminals cable not included, Telephone jack and cord

3 CHAPTER 3

Setting up and connecting

Jacks and cables

The illustrations in this section show the various types of jacks and cables used to connect your DIRECTV® HD Receiver.

ANTENNA terminals (cable not included)

Use AIR IN and CABLE IN terminals to receive a signal from VHF/UHF antennas or your cable system using an RG-6 coaxial cable, SATELLITE IN terminals can be used to connect Satellite dish input.

Audio/Video out jacks and cables (RCA-type)

Use these jacks and cables to connect your receiver to a TV, VCR, or to other components such as a stereo receiver or amplifier. The Video out jacks provide a basic quality composite video signal using RCA-type cables. Audio jacks can be used to connect the DIRECTV® HD Receiver to an A/V receiver.

The audio/video jacks on the back of the receiver

and the audio/video cable connectors are color coded (yellow for video, red for right audio, and white for left audio).

Telephone jack and cord

The TEL LINE jack and the included telephone cord connect your DIRECTV® HD Receiver to a phone line. If your home does not have RJ-11 type phone jacks, please contact your phone company to get one installed. A continuous land-based phone line connection is required for DIRECTV® Pay Per View functionality and DIRECTV subscriptions. Any calls generated by the DIRECTV® HD Receiver are toll-free.

These calls are typically made in the middle of the night; your phone is in use for approximately 30 seconds.

27