Samsung SIR-TS360 owner manual Chapter

3 CHAPTER 3

Setting up and connecting

2Highlight the Set Dish menu item, then press the SELECT button. The Set Dish menu appears.

Highlight the Select Dish Type menu item, then press the SELECT button.

3 The Select Dish Type screen appears.

Use the right-arrow button on your remote control to highlight

4 the Dish Type option on the Select Dish Type screen.

5to display the dish type you are using (Round, Oval-2, Oval-3, or No Dish). As you display each dish type, the on-screen pictures update showing you what each of these dish types look like. If you plan to use your DIRECTV® HD Receiver for

local off-air or cable TV programs, but do not plan to receive DIRECTV® programming, select No Dish.Use the up- and down-arrow buttons on your remote control

6off and on) for the Dish Type setting to take effect. When you have displayed the correct dish type, use the right-arrow button on your remote control to highlight the on-screen SELECT button, then press the SELECT button.A message appears warning you that your DIRECTV® HD Receiver needs to reboot (turn itself

7on-screen SELECT button, then press the SELECT button. To leave the Dish Type setting unchanged, highlight the on-screen Cancel button, and press the SELECT button.To change the Dish Type to the new setting, highlight the

After you select the on-screen SELECT button, the DIRECTV® HD Receiver will reboot.

If you selected No Dish, the DIRECTV® HD Receiver will perform an auto-scan to put your cable and off-air channels into its memory so you can tune them and see them in the on-screen Guide.

41