Samsung SNC-M300P manual PORTfields, set up port numbers, Enter your password, Number of Http

The manual network setting is finished.

You can’t change the port numbers of Device, TCP, UDP, Upload and Multicast, which are automatically changed according to the increase/decrease of the port

number of HTTP. 4

4 In the <PORT>fields, set up port numbers.

<HTTP Port>: A HTTP port used to connect
to a camera using the Internet
browser. The default value is 80.
The HPPT port value can be
changed by using the up/down
button to the right.
The HTTP port number starts
	5	6
with 80 and increases/decreases
to 10000, 10006, 10012…
<Device Port>: A port used to control video
transmission. The default value
is 60001(TCP).

<TCP Port>: A port used to transfer video using TCP protocol. The default value is 60002(TCP).

<UDP Port>: A port used to transfer video using UDP protocol. The default value is 60003(UDP).

<Upload Port>: A port used to upgrade software. The default value is 60004(TCP).

<Multicast Port>: Shows UDP port set for video transmission using UDP Multicast. The default value is 60005(UDP).

5 Enter your password.

The default password is “4321”.

The password is the camera login password of the root user. 6 Click the [OK] button.

7 The camera is set to the manually entered IP and is restarted.

04 SETTING STATIC IP

Setting Static IP _23