Samsung SNC-M300P manual To set an alarm image, Click Event  Alarm Image

To set an alarm image

You can set an image to be sent through FTP/Email(SMTP) or saved on the SDHC memory card when an alarm is generated or during the scheduled transfer.

1	Click <EVENT>  <ALARM IMAGE>.
	The ALARM IMAGE SETUP window appears.	1
2	To complete the setting,
		2
	click the [Apply] button.
	The settings are saved.	3

1.<Transfer Mode>: You can select a method to send an alarm image from the <FTP>, <E-Mail> and <SD Card Record>.

-<FTP Transfer>: The image is sent to the specified FTP address.

-<E-Mail Transfer>: The image is sent to the specified Email address.

-SD Card Recording

Insert an SDHC memory card.

Configure the SDHC memory card (refer to page 56 for details).

Check the SD Card Recording option and then click on the [Apply] button. The SD indicator will then turn on and recording will commence.

To remove the SDHC memory card, first uncheck the SD Card Recording option and then click on the [Apply] button.

Removing the SDHC memory card while recording is in progress can damage the data.

2.<Transferred Image Naming Setup>: You can set the file name of an alarm image to be sent when an alarm is generated or during the scheduled transfer.

3.<Pre/Post Alarm Image>: You can determine which of previous or posterior image is to be sent.

-<Number of Image>: Determines number of images to be sent per second. You can select 1 or 2 images per second.

-<Pre-Alarm Duration>: Determines time of prior images to be sent. You can select <1 sec> or <3 sec>.

You can send a prior image of up to 3 seconds after an alarm is generated.

(The maximum time is determined by the number of images to be sent per second.)

-<Post-Alarm Duration>: Determines time of posterior images to be sent. You can select <1 sec> or <3 sec>. You can send a posterior image of up to 3 seconds after an alarm is generated. (The maximum time is determined by the number of images to be sent per second.)

07 SETTING UP

Setting Up _57