overview
| Resets the camera settings to the default. Press and hold it for about 5 | ||
Reset Button | seconds to turn off the system indicator and restart the system. | ||
J Resetting the camera requires reconfiguration of network settings (IP | |||
| address, subnet mask, gateway address etc.) using the IP Installer | ||
| software application. | ||
Power Port | Used to plug the power cable. | ||
|
| ||
GND | Used for | ||
|
| ||
Network Port | Used to connect a PoE or LAN cable. | ||
|
|
| |
| ALARM IN | Used to connect the alarm input signal. | |
|
|
| |
I/O Port | ALARM OUT | Used to connect the alarm output signal. | |
|
| ||
ALARM COM | Common port where the alarm output signal is connected. | ||
| |||
GND
Used for
Video Out Port
Video signal output port connected to the monitor.
