setup screen
yEmail Configuration
-Server Address : Enter the IP address of the email server that you use for the email transfer.
ex) SMTP. hotmail. com
-User ID : Enter the user ID for logging into the email server.
-Password : Enter the user account password for logging into the email server.
-Port : The default port of the email server is 25; however, you can use a different port number according to the email server settings.
-Recipient : Enter the address of the email recipient.
-Sender : Enter the address of the email sender. If the sender address is incor- rect, the email from the sender may be classified as SPAM by the email server and thus may not be sent.
-Subject : Enter a subject for your email.
-Body : Provide the text for the massage. Attach the alarm images to the email that you are preparing.
4.When done, click [Apply].
SD Record
You can set the record conditions or the use of recording for the SD memory, check the size of stored data, or format the SD memory itself.
1.From the Setup menu, select the
<Event ( 
)> tab.
2.Click <SD Record>.
