installation & connection
1.Connect the AUDIO IN port of the camera with the microphone directly or LINE OUT port of the amplifier that the microphone is connected to.
2.Connect the AUDIO OUT port of the camera with the LINE IN port of the speaker.
3.Check the specifications for audio input.
yAudio Codec
G.711 PCM.
yFull duplex Audio
yAudio in
Used for mono signal line input (Max.2.4 Vpp)
yAudio out
Used for mono signal line output (Max.2.4 Vpp)
yLine out impedance
600
Alarm I/O Wiring Diagram
ALARM IN
ALARM OUT
ALARM COM
GND
1
2
3
4
5
(5mA sink)
(30VDC 2A, 125VAC 0.5A MAX)