3.Insert the camera assembly into the hole so that it fits to the camera hole, and fix the assembly using the assembly screw tappings (TH, M4xL30). (x3)
4.Close the dome cover.
5.Fix the cover to the main unit. Fit the protruding part inside the cover into the corresponding hole of the main unit, and turn the cover to fix it.
To add an alarm cable
1.For this, first you should remove the dome cover from the housing.
2.Pull out the protruding rubber bar as shown.
3.This will reveal a hole in the place of the rubber bar, through which you insert the cable, and connect it to the alarm terminal on the PCB.
4.Connect and arrange the necessary cables (power, video, etc) lest that they should be damaged or caught while installing the camera. Then, install the camera assembly in the reverse order of the disassembly.
5.Adjust the lens in a desired direction and close the dome cover.
M INSTALLATION & CONNECTION
English _27
