If the IP router has more than one camera connected
Configure the IP related settings and the Port related settings distinctly with each other.
| Category | Camera #1 | Camera #2 | |
IP related settings |
| IP Address | 192.168.1.200 | 192.168.1.201 |
| Subnet Mask | 255.255.255.0 | 255.255.255.0 | |
|
| Gateway | 192.168.1.1 | 192.168.1.1 |
Port related settings |
| HTTP Port | 80 | 10000 |
| VNP Port | 4520 | 4530 | |
M If the <HTTP Port> is set other than 80, you must provide the <Port> number in the address bar of the Internet browser before you can access the camera.
ex) http://IP address : HTTP Port http://192.168.1.201:10000
Auto Network Setup
Run <IP Installer.exe> to display the camera search list.
At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.
M For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this function.
1.Select a camera in the search list.
Find the MAC (Ethernet) address labeled on the rear of the camera.
Both the [Auto Set] and [Manual Set] buttons will be activated.
2.Click [Auto Set].
The Auto Setting dialog appears.
The <IP Address>, <Subnet Mask>, and <Gateway> will be set automatically.
3.Enter the password.
This is the login password for the "admin" user who accesses the camera. The default password is "4321".
4.Click [OK].
Auto network setup will be completed.
5.The camera will automatically complete the network setting and restart.
M NETWORK CONNECTION AND SETUP
