UPnP Status | This function is not currently implemented. |
URL | DDNS URL address enabling access from the external Internet. |
However, this will be replaced with the <IP Address> of the camera if | |
| DDNS registration has failed. |
IPv4 | Scans for cameras with the IPv4 setting. |
IPv6 | Scans for cameras with the IPv6 setting. |
Search | Scans for cameras that are currently connected to the network. |
However, this button will be grayed out if neither IPv4 nor IPv6 is checked. | |
Auto Set | <IP Installer> will automatically configure the network settings for you. |
Manual Set | You should configure the network settings manually. |
Exit | Exits the IP Installer program. |
STATIC IP SETUP
Manual Network Setup
Run <IP Installer.exe> to display the camera search list.
At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.
M For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this function.
1.Select a camera in the search list. Find the MAC (Ethernet) address labeled on the rear of the camera. Both the [Auto Set] and [Manual Set] buttons will be activated.
2.Click [Manual Set].
The Manual Setting dialog appears. The default values of <IP Address>,
<Subnet Mask>, <Gateway>, <HTTP Port> and <VNP Port> of the camera will be displayed.
The default <Password> is 4321.
M NETWORK CONNECTION AND SETUP
English _47
