overview
Inside
3
Item |
| Description |
| ALARM IN | Used to connect the alarm input signal. |
|
|
|
Alarm In / Out | ALARM OUT | Used to connect the alarm output signal. |
terminals | ALARM COM | Common port where the alarm output signal is connected. |
| GND | Used for |
|
|
|
SD Memory Card | Compartment for the SD memory card. | |
Compartment | ||
| Resets the camera settings to the default. Press and hold it for about 5 | |
Reset Button | seconds to turn off the system indicator and restart the system. | |
J Resetting the camera requires reconfiguration of network settings (IP | ||
| address, subnet mask, gateway address etc.) using the IP Installer | |
| software application. | |
