-User Name : Enter the user name for the DDNS service. (i.e., user ID that is registered with Dyndns)
-Password : Enter the password for the DDNS service. (i.e., password that is registered with Dyndns)
5.When done, click [Apply].
IP Filtering
You can create a list of IPs that you want to grant or deny access to them.
1.From the Setup menu, select the
<Network ( 
)> tab.
2.Click <IP filtering>.
3.Select a <Filtering Type>.
y Deny : If selecting this, access from those IPs that are added to the filtering will be restricted.
y Allow : If selecting this, access from only those IPs that are added to the filtering will be accepted.
4.Provide the IP that you want to grant or deny access from.
5.When done, click [Apply].
M SETUP SCREEN
SSL
You can select a secure connection system or install the public certificate for this purpose.
1.From the Setup menu, select the
<Network ( 
)> tab.
2.Click <SSL>.
3.Select a secure connection system.
To access the camera using HTTPS mode, you have to type the IP address for the camera in the form of “https://<Camera_IP>”.
4.Search for the public certificate that you want to install on the camera.
To install the certificate on the camera, you need to provide a certificate name (it can be arbitrarily assigned by the user), certificate file issued from the certification author- ity and a key file.
The <HTTPS(Secure connection mode using the public certificate)> item will be active only if there exists a public certificate installed.
5.When done, click [Apply].
English _75
