Samsung SPH-I325 manual Initial Setup

3.Press to turn the device on.

•Your device will turn on, search for

service, and then enter standby mode.

• If your device is not yet activated, or if it is locked, contact your service provider to activate your device.

Initial Setup

After you have powered on your device, you may wish to set some basic options. After the initial power-up, your device will display the Windows Mobile® screen where you will be guided through a series of setup procedures.

1.From the initial screen, press Next (right softkey) to begin the setup process.

2.Use both the navigation key and keypad to enter new values within the date and time fields. See "Configuring the Time and Date" on page 45.

•To toggle between AM and PM, highlight the AM/PM field and then press either A (for AM) or P (PM) on the keypad.

3.Press Next (right softkey) to continue on to the password setup screen where you can create a password, which must be used to access your device’s features and data. See "Locking Your Device with a Password" on page 47.

–or –

Skip to the next step if you do not wish to assign a password at this time.

4.Select “Prompt if device unused for” and press . (Enabling this option activates the remaining fields.)

5.Select each field and enter the desired information:

•Minutes: to select the amount of unused time (idle) required before you are prompted for a password.

•Password type: to choose from one of the following PIN types:

•Simple PIN: must be at least four characters in length and cannot contain a simple sequence such as 0000, 1111, or 1234.

2 Getting Started