30 Settings
Selecting Ringer Types for System Sounds
1. Press Start > More > More > Settings > Sounds > System Sound.
2. Select Exclamation,Question, or Warnings.
3. Use your navigation key to scroll through the available ringers. A sample
ringer will sound as you highlight each option.
4. Press Done (left softkey) to assign a ringer.
Keypad Tone
Your device offers a number of options for selecting the audible tones
accompanying a keypress.
1. Press Start > More > More > Settings > Sounds > Keypad Tone.
2. Use your navigation key to scroll through the available tones (default is
Click).
3. Press Done (left softkey) to assign a tone.
Call Alert Notification
Your device can alert you with an audible tone when you change service areas,
once a minute during a voice call, or when a call has been connected.
1. Press Start > More > More > Settings > Sounds > Call Alert.
2. Select Minute beep,Connect tone, or Signal fade tone.
3. Select On or Off for each category and press Done (left softkey).
Selecting an R2VS Setting
R2VS™ significantly enhances the quality of mono and stereo audio by simulating
stereo sound through a connected headset, thereby creating improved dynamics
and bass performance. R2VS provides panoramic three-dimensional audio that
extends the sound beyond the speakers or headphones themselves. These
enriching effects are especially noticeable on digitally compressed a udio formats
such as MP3 and WMA.
To utilize this feature, your device needs to be connected to a headset via the
Power/Accessory Interface Connector.
1. Press Start > More > More > Settings > Sounds > R2VS.
2. Use your navigation key to scroll through the available stereo settings.
3. Choose None (Mono), 3D Sound, or M-Theater.
4. Press Done (left softkey) to assign a setting.