++The Bluetooth POWER Function

When the Bluetooth Power function is on and the product is turned off, if a previously paired Bluetooth device tries to pair with the product, the product turns on automatically.

1.Press the Bluetooth POWER button on the remote control while the product is on.

2.ON-BLUETOOTH POWER appears on the SoundTower's display.

Available only if the product is listed among the Bluetooth device’s paired devices. (The Bluetooth device and the product must have been previously paired at least once.)

The product will appear in the Bluetooth device’s searched devices list only when the product is displaying [READY].

In the TV SoundConnect mode, the product cannot be paired to another Bluetooth device.

++To disconnect the Bluetooth device from the product

You can disconnect the Bluetooth device from the product. For instructions, see the Bluetooth device's user manual.

●● The product will be disconnected.

●● When the product is disconnected from the Bluetooth device, the product will display DISCONNECTED on the front display.

++To disconnect the product from the Bluetooth device

Press the SOURCE button on the remote control or press the ( ) button on the product's front panel to switch from BLUETOOTH to another mode or turn off the product.

●● The connected Bluetooth device will wait a certain amount of time for a response from the product before terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)

FUNCTIONS

In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the product and the Bluetooth device exceeds 16.25 ft. (5m).

More About Bluetooth

Bluetooth is a technology that enables Bluetooth- compliant devices to interconnect easily with each other using a short wireless connection.

●● A Bluetooth device may cause noise or malfunction, depending on usage, when:

-- A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the product.

-- It is subject to electrical variation from obstructions caused by a wall, corner, or office partition.

-- It is exposed to electrical interference from same frequency-band devices including medical equipment, microwave ovens, and wireless LANs.

●● Pair the product with the Bluetooth device while they are close together.

●● The further the distance between the product and Bluetooth device, the worse the quality is.

If the distance exceeds the Bluetooth operational range, the connection is lost.

●● In poor reception-sensitivity areas, the Bluetooth connection may not work properly.

●● The Bluetooth connection only works when it is close to the unit. The connection will be automatically cut off if the Bluetooth device is out of range. Even within range, the sound quality may be degraded by obstacles such as walls or doors.

●● This wireless device may cause electric interference during its operation.

ENG

13

Page 13
Image 13
Samsung TW-J5500/ZF manual ++The Bluetooth Power Function, ++To disconnect the Bluetooth device from the product