Samsung UA110S9VRXUM manual Failed Wired Connection, No network cable found Try Now Try Now

Failed Wired Connection

No network cable found Try Now Try Now

Make sure the network cable is plugged in. If it is connected, make sure the router is turned on. If it is on, try turning if off and on again.

IP auto setting failed Try Now

Perform the following or set the IP address manually from IP Settings.

111Ensure that the DHCP server is enabled on the router and reset the router.

222If this does not work, contact your Internet Service Provider for more information.

Unable to connect to the network Try Now

Check the following:

111Check the IP Settings.

222

333

Ensure that the DHCP server is enabled on the router and unplug and then plug the router back in.

If this does not work, contact your Internet Service Provider for more information.

Connected to a local network, but not to the Internet Try Now

111

222

333

Make sure that the Internet LAN cable is connected to the router's external LAN port.

Check the DNS settings under IP Settings.

If the problem persists, contact your Internet Service Provider.

Network setup complete, but unable to connect to the Internet Try Now

If the problem persists, contact your Internet Service Provider.