Samsung UA110S9ARXUM Motion Control Activation, Using the Basic Motion Controls, Pointer Speed

Motion Control Activation

Screen Menu > Smart Features > Motion Control > Motion Control Try Now

Raise your hand with the palm facing the TV. Hold it for a moment and slowly wave your hand from side to side three or four times. When your hand is successfully recognised, the Motion Control is activated and a pointer is displayed on the screen.

"" Dropping your hand out of the range of the TV camera deactivates Motion Control. Raise your hand within 3 seconds to reactivate it.

Using the Basic Motion Controls

Available motion commands may vary, depending on what the TV is currently doing. The following basic Motion Control commands are available:

●● Pointing Navigation: This action moves the cursor to the desired position.

●● Run / Select: Make a fist to select an option or execute a command. Keeping your fist clenched is like holding down a remote control button.

●● Return: Make a circle with your hand in the counterclockwise direction to return to the previous menu.

●● Turning over screens: Hold one palm vertical, and swing to the left or right to change the Smart Hub screens.

●● Zoom in / Zoom out: Clench two fists, and make the gap between them wider or narrower. Use these actions with webpages, maps, or photos.

●● Rotate: Clench two fists, and rotate them clockwise or anticlockwise as if turning a steering wheel. Use these actions with photos.

●● Like: Without activating the Motion Control, raise and hold your thumb for 2 seconds. This automatically adds Facebook's "Like" option. However, This motion is available only on the Facebook.

●● Pan: While zoomed into the photo, make a fist and then move it left / right / up / down to pan.

●● Scrolling a web page: While viewing a web page, make a fist and then move it up / down to scroll the page up / down.

Motion Control Options

Screen Menu > Smart Features > Motion Control

●● Animated Motion Guide

Displays an animated guide when user motion is detected.

●● Pointer Speed

Set the speed of the pointer used in Motion Control.