Samsung UA46D5000PMXSQ manual Problem Possible Solution

	Problem	Possible Solution
	I want to start Anynet+.	•• Check if the Anynet+ device is properly connected to the TV
		and check if the Anynet+ (HDMI-CEC)is set to On in the
		System menu.
		•• Press the TOOLS button to display the Anynet+ menu and
		select a menu you want.
	I want to exit Anynet+.	•• Select View TV in the Anynet+ menu.
		•• Press the SOURCE button on the TV remote control and select
◀		a device other than Anynet+ devices.	▶
		•• Press > CH < button to change the TV mode. (Note that the
		channel button operates only when a tuner-embedded Anynet+
		device is not connected.)

English