ENGLISH
Maintenance
After Finishing a Recording
✤At the end of a recording you must remove the power source.
✤When recording with a Lithium ion Battery pack, leaving the pack on the Camcorder can reduce the life span of the battery. The Battery pack should be released after recording is completed.
1.Slide the TAPE EJECT switch in the direction of the arrow.
■Opening the cassette door ejects the tape automatically.
■Please wait until the tape is completely ejected.
2.After removing the tape, close the door and store the Camcorder in a dust free environment. Dust and other foreign materials can cause
3.Set the Power switch to the OFF.
4.Disconnect the power source or remove the Lithium ion Battery pack.
Slide the BATT. RELEASE switch located on the bottom of the Camcorder and slide the Battery pack in the direction of the arrow.
1
2
3
4
111
