ENGLISH
7676
Playback
The Audio Dubbingfunction works only in Player Mode.
You cannotdub sound on a pre-recorded tape in LP or 16 bit mode.
You can add sound to the original sound on a pre-recorded tape recorded in SPmode with 12bit sound.
Use the internal or an external microphone (not supplied) or other audio equipment.
The original sound will not be erased.
1. Set the Power switch to PLAYER.
If you want to use an external microphone, connect the microphone to
the external MIC input jack on the Camcorder.
2. Set the Mode switch to TAPE.
When you wish to dub using the External A/V input, connect the Multi-AV
cable to the Multi-AV jack at the front side of camcorder. (see to page 75)
3. Press the (PLAY/STILL) button and find the time frame of the scene to
be dubbed.
4. Press the (PLAY/STILL) button to pause the scene.
5. Press the A.DUB button on the remote control.
Audio dubbing ( ) icon will be displayed.
The Camcorder is ready for dubbing.
6. Press the (PLAY/STILL) button to start dubbing.
7. Press the (STOP) button to stop the dubbing.
[ Notes ]
You cannot use the Audio dubbing function while playing a write protected video tape.
To utilize an external MIC or sound source, connect a microphone to the MIC jack or use the Multi-AV cableto connect to
external sound source input.
To dub an external sound source, set the AV In/Out function to AV In. (VP-D453i/D454i/D455i only)(see page 75)
Dubbing Sound

Audio Dubbing (VP-D453(i)/D454(i)/D455(i) only)

1
3 4 5