ENGLISH
Preparation
Using the Lithium Ion Battery Pack
✤The amount of continuous recording time available depends on.
-The type and capacity of the Battery pack you are using.
-How often the zoom function is used.
It is recommended that you have several batteries available.
Charging the Lithium Ion Battery Pack
1.Attach the Battery pack to the Camcorder.
2.Connect the AC Power adapter to an AC Cord and connect the AC Cord to a wall socket.
3.Connect the DC cable to the DC jack socket on the Camcorder.
4.Turn the Power switch to OFF, and the charging indicator will start to flash, showing that the battery is charging.
Blinking time |
| Charging rate |
|
| |
Once per second | Less than 50% | |
Twice per second | 50% | ~ 75% |
Three times per second | 75% | ~ 90% |
|
|
|
Blinking stops and stays on | 90% | ~ 100% |
On for a second and | Error - Reset the Battery pack and | |
off for a second | the DC cable | |
Power Switch
4
5.When the battery is fully charged, disconnect the Battery pack and the AC Power adapter from the Camcorder.
Even with the Power switched OFF, the Battery pack will still discharge.
<Charging indicator>
[ Notes ]
■The Battery may contain a slight charge at the time of purchase.
■To prevent reduction in the life and capacity of the Battery pack, always remove it from the Camcorder after it is fully charged.
■The amount of continuous recording time available depends on:
-The type and capacity of the Battery pack you are using.
-How often the zoom is used.
-Type of use (Camcorder/Camera/With LCD screen etc.).
-Ambient temperature.
It is recommended to have additional battery packs available.
■ Even when the Power switched Off, the Battery pack will still discharge if it is left attached to the device. | 21 |
|
