
ENGLISH
Playback
Connecting to a TV which has no Audio and Video Input Jacks
✤You can connect your Camcorder to a TV through a VCR.
1. Connect the Camcorder to your VCR with the | |
■ | The yellow jack: Video |
■ | The white jack: Audio(L) - Mono |
■ | The red jack: Audio(R) |
Video | Camcorder | |
| Audio |
|
VCR | Audio |
|
|
| |
| DV |
|
2. | Connect a TV to the VCR. | |
3. | Set the Power switch to PLAYER. | |
4. | Set the Mode switch to TAPE. | |
5. | Turn on both the TV and VCR. | |
| ■ | Set the input selector on the VCR to Line. |
| ■ | Select the channel reserved for your VCR on the TV set. |
6. | Play the tape. |
Playback
TV
Antenna
USB
AV/ S
Audio/Video/
✤You can play the recorded tape in Player mode.
1.Connect a power source and set the Power switch to PLAYER.
2.Set the Mode switch to TAPE.
3.Insert the tape you wish to play back.
4.Using the /
(REW/FF) buttons, find the first position you wish to play back.
5.Press the (PLAY/STILL) button.
■The images you recorded will appear on the TV after a few seconds.
■If a tape reaches its end while being played back, the tape will rewind automatically.
[ Notes ]
■The playback mode (SP/LP) is determined by the mode in which the tape was recorded.
■If the VCR has an
■The
■If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L).
71