Sanyo CD-RW880 Listening to a CD, 1Press the POWER switch, 3Press the OPEN/CLOSE button L, Cd-R

Listening to a CD

43 6

5

1

1Press the POWER switch.

The unit enters standby mode, and “STAND-BY” lights on the display.

2Press the STANDBY/ON button of the remote control unit to turn the unit on.

When no disc is set, “NO DISC” appears on the display.

<If one of the following buttons is pressed in the standby mode, the unit will also turn on:

OPEN/CLOSE, PLAY, STOP

3Press the OPEN/CLOSE button (L).

4Place a disc on the tray with the printed label face up.

<Never place more than one disc on the tray.

<The disc must be placed in the center of the disc tray. If the disc is not correctly loaded, it may not be possible to open the tray again once it has closed, so you should ensure the disc is always centered on the tray.

<Do not force the tray by hand during opening and closing operations.

5Press the OPEN/CLOSE button (L) to close the tray.

<It takes a few seconds for the unit to load the disc. No buttons will work during loading. Wait until the total number of the tracks and the total play time of the disc are displayed.

disc type indicator

total number of the tracks total play time of the disc

<The disc type indicator shows the type of disc currently loaded.

CD:

A commercial pre-recorded CD

CD-R:

A finalized CD-R

CD-RW:

A finalized CD-RW

CD-R NO TOC :

A CD-R which has yet to be finalized

CD-RW NO TOC :

A CD-RW which has yet to be finalized

blank:

No disc

6Press the PLAY button (y) to start playback.

Disc playback starts from the first track, and the PLAY indicator (y) lights on the display.

<If you load the disc, and then press the PLAY button without having first closed the disc tray, the disc tray closes and playback starts.

10