Sanyo CD-RW880 owner manual Automatic Track Division, A.TRACK -60, -50, -40or -30dB, Manual

Automatic Track Division

When the AUTO/MANUAL button is pressed once, the current mode is displayed. Press the AUTO/MANUAL button repeatedly to select any other mode.

A.TRACK	A.TRACK	A.TRACK	A.TRACK
(–60 dB)	(–50 dB)	(–40 dB)	(–30 dB)

MANUAL

<The “A . TRACK” indicator lights when –60dB, –50dB, –40dB or –30dB is selected.

A.TRACK (–60, –50, –40 or –30 dB)

When recording digitally, the unit will automatically insert a track division in the recorded material when an increment signal is detected.

When the digital source doesn’t contain increment signals, or when recording analogically, the unit will automatically insert a track division in the recorded material when sound level has dropped below the increment level (–60, –50, –40 or –30dB) for more than 3 seconds and then sound has re-started.

You can add track numbers by pressing the RECORD button during recording.

The increment level is also used to trigger analog synchronous recording (see next page).

“–30dB” takes a louder signal to trigger the start of the analog synchronous recording or a track division. “–60dB” means that a relatively quiet signal will trigger the start of the analog synchronous recording or a track division. “–60dB” is suitable for recording a noiseless source such as a CD.

MANUAL

The unit doesn’t divide tracks.

Use the RECORD button to divide tracks.

MANUAL is recommended for recording an analog source such as a record.

<AUTO TRACK may not work properly with analog sources that contain low-level noises.

<The default setting is –60. When the POWER button or the STANDBY/ON button is pressed, the setting is automatically reset to –60.

(In case the INPUT SELECT is set to ANALOG, the default setting is –50.)

<The AUTO/MANUAL button doesn’t work during recording or in the record pause mode.

18