6Press the PLAY or the PAUSE button to start recording.
7Play the source to be recorded.
When the playback of the source has been finished, press the STOP button to stop recording.
<The STANDBY/ON button doesn’t work during recording.
To stop recording
Press the STOP button (H) to stop recording.
To suspend recording temporarily (pause mode)
Press the PAUSE button (J). “WAITING” briefly appears on the display, and the recording is paused.
To restart recording, press the PLAY button (y) or the PAUSE button (J).
<You cannot restart recording while “WAITING” is displayed.
<Remember that every time recording is paused or stopped, a new track number will always be assigned. It is not possible to record in two “stages” within one track.
Sampling Rate Converter
This unit incorporates a sampling rate converter so that it can record digital signals sampled at 48 kHz or 32 kHz by converting the sampling frequency into 44.1 kHz.
Manual track division
It is possible to divide the recording into tracks while recording.
While recording is taking place, press the RECORD button. The current track number will be incremented by one.
<Manual track division is possible regardless of the AUTO/MANUAL setting.
<A track cannot be less than four seconds in length. The RECORD button will not work if it is pressed within four seconds from the beginning of a track.
Input Monitoring
To monitor the input signal
When there is no recordable disc in the unit, press the RECORD button (when there is a recordable disc in the unit, pressing the RECORD button will enter record pause mode).
The word MONITOR appears on the display to show that the output signal is an echo of the input signals. The meters show the current input level.
Exit the monitor mode by pressing the STOP button.
17
ENGLISH
