Sanyo CLT-5812 instruction manual Entering your area code

Press the SELECT/CH key.

UP016DH(CLT5812) ENG OM 3/7/05 5:22 PM Page 14

GETTING STARTED

Entering your area code

If you enter a 3-digit area code number in the Area Code option, your local area code does not appear in Caller ID messages. Do not program this option if your calling area requires 10-digit dialing. When reviewing Caller ID messages, you will see only the local seven digit number. For calls received from outside your local area code, you will see a full 10-digit number.

1 When the phone is in standby mode, press and hold the CID/MENU key. The following screen appears.

2 Press the VOL/RING key twice to move the pointer to ¨Area Code¨.

3

4 Use the number (0 - 9) or DELETE/TRANS key to enter the 3-digit area code.

5 Press the SELECT/CH key. A confirmation

tone sounds and the displayed area code is entered.

6 Press the END key or return the handset to the base unit or charging cradle to complete the setting. The handset returns to standby mode.

Note:

When the area code has already been stored in memory, the stored area code will be displayed. To change it, use the DELETE/TRANS key and number keys to enter the new area code.

Then press the SELECT/CH key. A confirmation tone sounds.

To complete the setting, press the END key or return the handset to the base unit or charging cradle.

E14