Getting Started, Checking the package contents | Sanyo CLT-5812

UP016DH(CLT5812) ENG OM 3/7/05 5:21 PM Page 4

GETTING STARTED

Checking the package contents

Make sure you have received the following items in the package.

• Base unit (1)	• Handset (2)
• AC adapter (2)	• Rechargeable battery (2)
• Telephone cord (1)	• Charging cradle (1)
• This instruction manual	• Belt Clip (2)

Setting up the phone

Do the following steps:

A.Choose the best location

B.Install the rechargeable battery packs into the handsets

C.Connect the base unit and charging cradle and charge the handsets

A.Choose the best location

Here are some important guidelines you should consider:

•The location should be close to both a phone jack and a continuous power outlet that is not switchable.

•Keep the base and each handset away from sources of electrical noise such as motors, microwave ovens, and fluorescent lighting.

•The base should be placed in an open area for optimum range and reception.

•The cradle can be placed on a desk, tabletop, or mounted on a standard wall plate.

Note:

If your home has specially wired alarm equipment connected to the telephone line, be sure that installing the system does not disable your alarm equipment.

If you have questions about what will disable your alarm equipment, contact your telephone company or a qualified installer.

E4

Image 6

Sanyo CLT-5812 instruction manual Getting Started, Checking the package contents, Setting up the phone

Contents

GHz Features Introduction Contents Controls and functions Dual Handsets CHARGE/IN USE LED Checking the package contents Setting up the phoneGetting Started Install the rechargeable battery packs into the handsets Talk Mode Low battery alertCleaning the battery charging contacts Standby Mode Route the cord Tip Before using, register second handset to the base unit Follow these simple steps to register To transfer a call to the second handset When to re-register handsetsCall transfer feature To receive a transfer call from the second handset Mounting the base unit on a wall Standard wall plate mounting Direct wall mounting Setting menu options Changing your Automatic Talk Auto Talk and Cidcw Entering your area code Choosing the dialing mode Setting the language Handset On Base BasicsMaking and receiving calls Or Charging Cradle Earpiece volume Adjusting the handset ringer and earpiece volumeHandset ringer tone and volume Temporarily mute ringer Tone dialing switch-over RedialTraveling out-of-range Selecting a different channel Flash and call waiting Voice mail waiting indicator Directory Storing phone numbers and names E22 Steps for entering names and special characters If you make a mistake while entering a name E24 Memory dialing from Standby Mode Memory dialing from Talk ModeMaking calls with memory dialing Chain dialing Editing a stored name and/or phone number SELECT/CH key E28 Erasing a stored name and phone number ¨Delete MemoryXX?¨ appears Speed Dial Speed dialStoring and editing the speed dial Making calls with the speed dial Deleting the speed dial You must subscribe to Caller ID service to use this feature Caller ID FeaturesWhen the telephone rings Caller ID Viewing the Caller ID message list Deleting information from the Caller ID list When the pointer is at ¨Yes¨When the pointer is at ¨No¨ Deleting a Caller ID message Caller ID Features Using the Caller ID list Long Distance calls and Area Code Setting/CancellationCalling a party from the Caller ID list Storing Caller ID messages in memory dialing Returns to the Caller ID list Changing the digital security code Installing the beltclipAdditional Information To attach the beltclip Battery replacement and handling Power Failure Troubleshooting Symptom Suggestion CHARGE/IN Symptom Suggestion Unavailable Important Safety Instructions Technical Information Sanyo Comfort Warranty Sanyo Canada INC.’S Responsibility SOS Help Line Shipping costs of the unit back to Sanyo UCZZ01016DZ