UP016DH(CLT5812) ENG OM 3/7/05 5:21 PM Page 8

GETTING STARTED

After installing the battery packs in the handsets, charge your handsets at least 15-20 hours before plugging into the phone line.

4 Place one handset in the base unit and one handset in the charging cradle for 15-20 hours without interruption. The base or charging cradle unit’s LED light (labeled CHARGE/IN USE or CHARGE) illuminates once the handset is placed in the base and charging cradle. The LED light will illuminate whether the battery pack is connected or not.

If the base or charging cradle CHARGE/IN USE or CHARGE LED light does not illuminate:

Check to see if each AC adapter is plugged into each charging

cradle and the electrical wall outlet properly. (Use only the supplied AC adapter. Do not use any other AC adapter.)

Check to see if each handset is sitting correctly in each charging cradle and making good contact with each charging contacts.

5 Once the handset battery packs are fully

charged, connect the telephone line cord to the TEL LINE jack and

to a telephone outlet.

Tip:

If your telephone outlet isn't modular, contact your telephone company for assistance.

Modular

E8

Page 10
Image 10
Sanyo CLT-5812 instruction manual Tip