Sanyo CLT-5812 1, 2

E12

GETTING STARTED

Direct wall mounting

If you don't have a standard wall plate, you can mount your phone

directly to the wall. Before doing this, consider the following:

• Avoid electrical cables, pipes, or other items behind the mounting

location that could cause a hazard when inserting screws into

the wall.

• Try to mount your phone within 5 feet of a working phone jack to

avoid excessive cable lengths.

• Make sure the wall material is capable of supporting the weight of

the base and handset.

• Use #10 screws (minimum length of 1-3/8 inches) with anchoring

devices suitable for the wall material where the base unit will

be placed.

1Insert two mounting screws into the wall,

(with their appropriate anchoring device),

3-15/16 inches apart.

Allow about 1/8 of an inch between the

wall and screw heads for mounting

the phone.

2Refer to steps 1 through 6 on page E11 to

mount the telephone.

UP016DH(CLT5812) ENG OM 3/7/05 5:21 PM Page 12

Contents

Main CLT-5812 Introduction Features Getting started UP016DH(CLT5812) ENG OM 3/7/05 5:21 PM Page 1 Basics Directory CONTENTS Basics Directory Speed Dial Caller ID Features Additional Information Controls and functions Page E4 Checking the package contents Setting up the phone A. Choose the best location B. Install the rechargeable battery packs into the handsets 1 2 3 4 IMPORTANT Low battery alert Low Battery Contacts Cleaning the battery charging contacts Terminology 1 IMPORTANT 2 3 E7 4 5 E8 Tip: Follow these simple steps to register: 1 HS2 HS1 E9 2 1 2 To receive a transfer call (from the second handset) 1 2 E10 When to re-register handsets Call transfer feature Page E12 Direct wall mounting 1 2 E13 Setting menu options HS2 Off On HS1 2 4 5 6 E14 2 3 4 Setting the language 2 4 E15 E16 Making and receiving calls Adjusting the handset ringer and earpiece volume E18 Redial Tone dialing switch-over Traveling out-of-range Scanning E19 Selecting a different channel Page Flash and call waiting E20 Voice mail waiting indicator E21 Storing phone numbers and names 1 2 3 4 Store Name 6 E22 Store Number 9 Memory01 Stored Steps for entering names and special characters Page E25 Memory dialing from Standby Mode 1 Making calls with memory dialing 4 3 Memory dialing from Talk Mode 1 2 Chain dialing E26 E27 1 Editing a stored name and/or phone number 3 4 5 8 Memory01 Stored 9 E29 1 Erasing a stored name and phone number 2 MemoryXX Deleted Delete MemoryXX? SPEED DIAL Speed dial Storing and editing the speed dial Number Stored 1 SPEED DIAL Making calls with the speed dial Deleting the speed dial 4 Delete Number Caller ID 1 When the telephone rings 2 E33 1 3 4 Viewing the Caller ID message list E34 1 Deleting information from the Caller ID list 2 4 Deleting all Caller ID names/numbers 1 2 E35 4 Delete Message? Delete All? E36 Calling a party from the Caller ID list 1 2 Using the Caller ID list Long Distance calls and Area Code Setting/Cancellation E37 1 2 3 4 E38 1 2 3 4 Changing the digital security code Note on power sources RECYCLING NICKEL-CADMIUM BATTERIES NICKEL-CADMIUM BATTERIES MUST BE DISPOSED OF PROPERLY. E40 Troubleshooting E41 E42 Unavailable Technical Information UP016DH(CLT5812) ENG OM 3/7/05 5:23 PM Page 43 E43 IMPORTANT SAFETY INSTRUCTIONS 1 THE SANYO COMFORT WARRANTY UP016DH(CLT5812) ENG OM 3/7/05 5:23 PM Page 44 E44 E45 SOS HELP LINE 1-800-263-2244 between 8:30 am 7:00 pm EST STAY-AT-HOME CONVENIENCE HASSLE-FREE EXCHANGE GUARANTEED QUALITY UP016DH(CLT5812) ENG OM 3/7/05 5:23 PM Page 46