Transfer Call

UP016DH(CLT5812) ENG OM 3/7/05 5:21 PM Page 10

GETTING STARTED

When to re-register handsets

1 You’ll need to re-register the second handset (follow steps on page E9) each time the digital security code is changed. Refer to page E38 for details regarding the Digital Security Code.

2 When there is a power failure for more than one hour:

If power failure occurs (e.g. due to electrical storm or if the unit is unplugged during a move), both handsets will need to be re- registered. To re-register, follow the same registration process on page E9.

Call transfer feature

Conveniently, your cordless phone allows you to transfer outside calls from handset to handset, simply by pressing the DELETE/TRANS key. Not to worry, conversations will not be interrupted; only one handset at a time can talk with an outside caller.

The second handset cannot go off hook to listen to conversations or make an outgoing call while the other handset is in use.

To transfer a call (to the second handset)

1 Press the DELETE/TRANS key during a call.

Hold

The call will automatically be placed on

Transfer Call

 

hold and the transfer tone sounds.

 

2 When the other handset receives the call, the transfer tone stops. To cancel the transfer, press DELETE/TRANS or TALK/FLASH on the handset.

To receive a transfer call (from the second handset)

Pick up the handset (when Automatic Talk is set to On), or pick up the handset and press the TALK/FLASH key to answer the transferred

call. Additionally, you can answer the transferred call by pressing any number key, the /TONE/ , or #/ key (when Automatic Talk is set to On).

Notes:

If the second handset’s battery becomes very low, the handset must be recharged for 15-20 hours and re-registered to the base unit.

If you transfer the call and it is not picked up after 5 minutes, the call will be disconnected.

E10

Page 12
Image 12
Sanyo CLT-5812 When to re-register handsets, Call transfer feature, To transfer a call to the second handset