UP016DH(CLT5812) ENG OM 3/7/05 5:23 PM Page 40

ADDITIONAL INFORMATION

Troubleshooting

If your phone is not performing to your expectations, please try these simple steps first.

Symptom

Suggestion

 

 

The CHARGE/IN

• Make sure the AC adapter is plugged into

USE LED or

each charging cradle and wall outlet.

CHARGE LED won't

• Make sure both handsets are properly seated

illuminate when

in each charging cradle.

the handset is

• Make sure the charging contacts on the

placed in the base

handset, base, and charging cradle are clean.

or charging cradle.

 

 

 

The audio sounds

• Move the handset and/or base to a different

weak and/or

location away from metal objects or

scratchy.

appliances and try again.

 

• Press the SELECT/CH key to help eliminate

 

background noise.

 

• Make sure that the handset is not too far

 

from the base.

 

 

Can't make or

Re-register both handsets (see page E9).

receive calls.

• Check both ends of the telephone line cord.

 

• Make sure the AC adapters are plugged into

 

both the base and wall outlet.

 

• Disconnect the AC adapter for a few minutes,

 

then reconnect it.

 

• Make sure that the handset is not too far

 

from the base.

 

• Charge the handset.

 

 

E40

Page 42
Image 42
Sanyo CLT-5812 instruction manual Troubleshooting, Symptom Suggestion CHARGE/IN