Low battery alert
When the battery pack is very low and needs
to be charged, the phone is programmed to
eliminate functions in order to save power.
If the phone is not in use, ¨

Low Battery

¨
appears on the LCD and none of the keys will operate.
If the phone is in use, ¨

Low Battery

¨ flashes and the handset beeps.
Complete your conversation as quickly as possible and return the
handset to either charging cradle for charging.
Cleaning the battery charging contacts
To maintain a good charge, it is
important to clean the charging
contacts on both the handsets, base
unit and charging cradle once a
month. Using rubbing alcohol
dampen a cloth to clean the charging
contacts. Then make sure to go back
over the charging contacts with a dry
cloth before returning the handset to
the base to charge.
Caution:Prevent alcohol from
prolonged contact with cabinet to
avoid possible damage to the finish.
Terminology
• Talk Mode -
The handset is off either charging cradle and the TALK/FLASHkey
has been pressed, enabling a dial tone.
• Standby Mode -
The handset is not in use, off either charging cradle, and the
TALK/FLASHkey has not been pressed. A dial tone is not present.

E6

GETTING STARTED
• The last number dialed in the redial memory and the numbers stored in the
memory locations are retained for up to 3 minutes while you replace the
battery pack.
• Even when the battery pack is not being used, it will gradually discharge over
a long period of time.
Notes:

Contacts

UP016DH(CLT5812) ENG OM 3/10/05 5:28 PM Page 6