Sanyo_901089:ECJ_M100 6/3/09 9:40 AM Page 11
CLEANING AND MAINTENANCE
•Always unplug the power cord from the electrical outlet and allow the unit to cool off completely prior to cleaning.
•When cleaning the unit, do not use cleaning powder, scrub brush, benzene or thinner.
•Do not wash Inner Pot, Steam Vent and Inner Lid in the dishwasher. This action may cause damage, discoloration or disfiguration.
•Attach the Inner Lid with Steam Vent attached properly after each cleaning.
MAIN BODY
Wipe with
a damp cloth.
HEATING ELEMENT AND TEMPERATURE SENSOR | INNER LID SEAL |
English
If rice grains or other dirt become stuck to the heating element, gently polish with fine sandpaper (about 320 grit) and then wipe clean with a damp sponge.
Heating Element
Temperature Sensor
•Wash the Inner Lid Seal thoroughly with a sponge and a dishwashing detergent. Dry them with a soft cloth.
•Make sure to attach the Inner Lid Seal properly to the Outer Lid after cleaning.
1How to Remove the Inner Lid Seal
• Grasp the Inner Lid Seal and
gently remove from the Inner
Lid Groove.
INNER POT
Wash the inner pot using a sponge and dishwashing detergent after each use.
To prevent damage to the
• Do not wash rice in the Inner Pot using hard objects, |
such as metal whisks. |
• Use provided spatula for serving rice. |
2How to Attach the Inner Lid Seal
Step 1: Place flange of the Inner Lid Seal into the Inner Lid Groove, as shown below.
Cross section of Inner Lid Seal
• Do not wash hard objects, such as spoons or rice |
bowls within the Inner Pot. |
• Do not use vinegar in the Inner Pot. |
• Make sure that the Inner Pot is washed immediately |
after any rice with seasoning has been cooked. |
• Some discoloration of the Inner Pot may occur through |
normal use. This is completely safe and poses no |
Inner Lid
Inner Lid Seal
Inner Lid Groove
health hazard. |
Step 2: Continue inserting the flange of the Inner Lid Seal into the Inner Lid Groove, until securely fastened around the entire Inner Lid.
INNER LID AND STEAM VENT
•Wash Inner Lid and Steam Vent thoroughly with a sponge and dishwashing detergent. Dry with a soft cloth.
•Make sure to attach them to the Outer Lid after cleaning.
1How to Remove:
•Remove the Steam Vent Cover from the Outer Lid.
•Pull the Inner Lid towards you.
2How to Attach:
•Align the Steam Vent and Positioning Bases into the two holes on inside of the Outer Lid and press it
in place.
•Align the Steam Vent Cover into the Steam Vent Gap and press down. Turn it slightly left to right one or two times to fasten the Steam Vent Cover.
Cautions
•Make sure to remove the Steam Vent first and then the Inner Lid.
•Never pull the Inner Lid Seal while removing the Inner Lid.
•Apply balanced force to pull from both sides to facilitate the disassembly.
Step 3: After installation, confirm that the Inner Lid Seal is securely and evenly seated in the Inner Lid Groove, before using the rice cooker.
TEMPERATURE SENSITIVE RING SEAL
If the Temperature Sensitive Ring Seal is removed, make sure it is
11