Sanyo ECJ-M100S manual Specifications, Symptom Remedy, Symptom Possible Cause

Sanyo_901089:ECJ_M100 6/3/09 9:40 AM Page 12

English

TROUBLESHOOTING Check the following before requesting service .

Symptom	Remedy
• Plug or power cord is damaged, distorted, expanded, or discolored.	• Unplug the power cord and stop
• Power cord or plug is warmer than normal.	using the appliance immediately.
• Power cord fits loosely or loses power.	Contact Sanyo Fisher Service
• Overheated main body produces burning odor.	(see warranty, page 16).
The power plug blades or plug surfaces are dirty.	Clean thoroughly.

Symptom	Possible Cause	Reference Page #
Rice does not	Is the power cord plugged in properly or has a power failure occurred?	4, 6
	Has the cook menu button been depressed?	6
cook.
	Was adequate water added to the Inner Pot?	6, 7
	Is the power cord plugged in properly or has a power failure occurred?	4, 6
	Was adequate water added to the Inner pot?	6, 7
Rice is hard or	Was the rice stirred thoroughly after cooking?	7
undercooked.	Was the correct menu function selected?	6, 7
	Are there any foreign objects sticking to the exterior of the Inner Pot, Sensor,	4, 6, 11
	Heating Element, or in Lid Seal?
	Was too much water added to the Inner Pot?	6, 7
Rice is soft or	Was the rice stirred thoroughly after cooking?	7
	Are there any foreign objects sticking to the exterior of the Inner Pot, Sensor,
sticky.		4, 6, 11
	Heating Element, or in Lid Seal?
	Was the correct menu function selected?	6, 7
	Was adequate water added to the Inner Pot?	6, 7
	Are there any foreign objects sticking to the exterior of the Inner Pot, Sensor,	4, 6, 11
Rice is scorched.	Heating Element, or in Lid Seal?
	Was the correct menu function selected?	6, 7
	Was rice washed thoroughly before cooking?	6, 7
	Is the power cord plugged in properly or has a power failure occurred?	4, 6
Rice cooking	Was too much water added to the Inner Pot?	6, 7
	Was the correct menu function selected?	6, 7
takes too long.
	Are there any foreign objects sticking to the exterior of the Inner Pot, Sensor,	4, 6, 11
	Heating Element, or in Lid Seal?
While using the	Is the power cord plugged in properly or has a power failure occurred?	4, 6
Keep Warm	Was the rice stirred thoroughly after cooking?	7
function, the rice	Was rice washed thoroughly before cooking?	6, 7
becomes hard,	Are there any foreign objects sticking to the exterior of the Inner Pot, Sensor,	4, 6, 11
discolored, or	Heating Element, or in Lid Seal?
develops an odor.
	Has the rice been kept warm for over 8 hours?	7
	Was too much water added to the Inner Pot?	6, 7
Water boils over	Are there any foreign objects sticking to the exterior of the Inner Pot, Sensor,	4, 6, 11
	Heating Element, or in Lid Seal?
during cooking.
	Was the correct menu function selected?	6, 7
	Was rice washed thoroughly before cooking?	6, 7
Steam leaks out	Was the correct amount of water added to the Inner Pot?	6, 7
	Was the correct menu function selected?	6, 7
from around the
	Are there any foreign objects sticking to the exterior of the Inner Pot, Sensor,
lid.		4, 6, 11
	Heating Element, or in Lid Seal?
There is noise	Were water droplets present on the exterior of the Inner Pot or interior of Main	4, 6, 11
during cooking.	Unit? Water droplets may cause noise during cooking. This is not a malfunction.

SPECIFICATIONS

MODEL No.			ECJ-M100S
Power Source			120 V 60 Hz
Power Consumption	Cooking: 650 Watts			Keep Warm: 15 Wh
	White Rice			2 – 10 cups
Cooking Capacity (uncooked)	Brown Rice			2 – 8 cups
	Sushi			2 – 10 cups
	Porridge			0.5 – 2.5 cups
Unit Dimensions (WxHxD)”		10 13/16” x 11“ x 11”
Weight			7.3 lbs.
Cord Length		Approx. 47 1/4”

12