ALARM AND SENSOR SETTING
Menu 4
(ALARM SET)
When an alarm trigger is received from sensors such as a door bell, movement sensor, etc. you can set the display mode and the recording mode for the pictures from the concerned camera.
Using the (SENSOR SET) settings (see page 32), the triggers received from the video sensors can be set to operate as alarm triggers.
BUZZER (Default setting: ON)
ON: A buzzer will be heard when an alarm trigger is received.
OFF: The buzzer will not be heard.
DATA (Default setting: ON)
ON: The alarm data is recorded.
OFF: The alarm data is not recorded.
Changing the Settings
1 Press the MENU button 4 times to display the (ALARM SET) menu.
2 Using the + (or
•Repeat step 2, until all the settings are as desired.
3 ☞Press the l button to go to the (SENSOR SET) menu, or
☞Press the MENU button to go to the next menu screen, or
☞Press the EXIT button to exit the menu display.
2
(ALARM SET)
DURATION | 10 | S |
RETRIGGER | OFF |
|
BUZZER | ON |
|
DATA | ON |
|
MON.1 OUT | FULL | |
DOUBLE ALARM | LAST | |
MON.2 OUT | OFF |
|
(SENSOR SET) |
|
|
SENSOR ALARM | OFF |
|
DURATION | 10 | S |
MON.1 OUT
(A) |
|
|
|
|
|
|
| (C) |
|
|
|
| ||
| (ALARM SET) |
|
|
|
|
|
|
|
| (ALARM SET) |
|
|
|
|
| DURATION | 10 | S |
|
|
| DURATION | 10 | S | |||||
| RETRIGGER | OFF |
|
|
|
|
|
|
| RETRIGGER | OFF |
|
|
|
| BUZZER | ON |
|
|
|
|
|
|
| BUZZER | ON |
|
|
|
| DATA | ON |
|
|
|
|
|
|
| DATA | ON |
|
|
|
| MON.1 OUT | FULL |
|
|
|
|
|
| MON.1 OUT | NC |
|
|
| |
| DOUBLE ALARM | LAST |
|
|
|
|
|
|
|
|
|
|
| |
| MON.2 OUT | OFF |
|
|
|
|
|
|
| MON.2 OUT | OFF |
|
|
|
| (SENSOR SET) |
|
|
|
|
|
|
|
| (SENSOR SET) |
|
|
|
|
| SENSOR ALARM | OFF |
|
|
|
|
|
|
| SENSOR ALARM | OFF |
|
|
|
| SENSOR DURATION | 10 | S |
|
|
| SENSOR DURATION | 10 | S | |||||
(B) |
|
|
|
|
|
|
| (D) |
|
|
|
| ||
| (ALARM SET) |
|
|
|
|
|
|
|
| (ALARM SET) |
|
|
|
|
| DURATION | 10 | S |
|
|
| DURATION | 10 | S | |||||
| RETRIGGER | OFF |
|
|
|
|
|
|
| RETRIGGER | OFF |
|
|
|
| BUZZER | ON |
|
|
|
|
|
|
| BUZZER | ON |
|
|
|
| DATA | ON |
|
|
|
|
|
|
| DATA | ON |
|
|
|
| MON.1 OUT | MULTI16 |
|
|
|
|
| MON.1 OUT | MULTI9 |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| MON.2 OUT | OFF |
|
|
|
|
|
|
| MON.2 OUT | OFF |
|
|
|
(A) FULL (Default setting):
If an alarm trigger is received, the picture from the camera corresponding to the alarm input will be displayed full screen.
•DOUBLE ALARM (Default setting: LAST)
When using the “FULL” setting at the “MON.1 OUT” line, the following settings are possible.
ALARM SET menu
DURATION (Default setting: 10 S)
The available durations are (seconds):
1, 2, 3, 4, 5, 10, 20 (in 10 seconds increments)... 180, CC, NC, INDIV., OFF
CC:The alarm will go on as long as the alarm signal is received (minimum 1 second).
NC: The alarm will continue until reset.
INDIV.:The alarm duration will be as set for each of the cameras.
OFF: No alarm duration setting.
NOTE: If the “INDIV.” setting is used, in the (CAMERA SET) menu, enter the desired alarm duration for each camera (see page 38).
(CAMERA SET) NO.01
TITLE
DAY NIGHT
PROGRAM REC OFF OFF
AL.DURATION 10 S 10 S
MON.MASK OFF OFF
RETRIGGER (Default setting: OFF)
To set if an alarm is received while the unit is already in alarm mode.
ON: During alarm mode, other alarm triggers will be received and the alarm duration will be extended.
LAST: When triggers from multiple cameras are received in full screen mode, the picture from the camera of the last alarm received is displayed.
FIRST: When triggers from multiple cameras are received in full screen mode, the picture from the camera of the first alarm received only is displayed. Camera pictures from subsequent alarm triggers will not be displayed.
SWITCH: When triggers from multiple cameras are received in full screen mode, the picture from each concerned camera will be displayed sequentially at 1 second interval.
(B)MULTI16: When an alarm trigger is received, the display
will switch to a 16 divisions screen.
(C)MULTI9: When an alarm trigger is received, the display will switch to a 9 divisions screen. However, if the alarm trigger is at a camera other that the ones displayed in 9 divisions screen, the picture from the concerned camera is not displayed.
(D)NC: The display mode will remain unchanged when an alarm trigger is received.
MON.2 OUT (Default setting: OFF)
ON: Monitor 2 display will switch to full screen alarm display, when an alarm trigger is received.
OFF: Monitor 2 display will not change.
OFF: The unit will not receive another alarm, while one is already being received.
English | 31 |