Manuals / Brands / Computer Equipment / Network Card / Sanyo / Computer Equipment / Network Card

Sanyo MPX-CD162, MPX-MD162 Changing a camera position, Menu, (POSITION SET)

1 55

Download 55 pages, 1.07 Mb

SETTING EACH CAMERA DISPLAY POSITION IN
SPLIT SCREEN DISPLAY MODE	Menu 8

You can set where each camera will be displayed when viewing a split screen display. Setting for 16 divisions and 9 divisions split screen is available.

(POSITION SET)

Changing a camera position

1 Press the MENU button 8 times to display the (POSITION SET) menu.

The 16 divisions setting screen is displayed.

Press the NEXT button to switch between the 9 divisions and the 16 divisions setting screens.

2 Example: To interchange the display positions of

camera 5 and camera 16.

1Using the l, j, d and c buttons, move the cursor to the first camera number (05).

2Press the + (or –) button to change the number to the desired camera number (16).

1

(POSITION			SET)	(POSITION SET)
	MULTI 16			MULTI		9
01	02	03	04	01	02	03
05	06	07	08	04	05	06
09	10	11	12	07	08	09
13	14	15	16	NEXT
13	14	15	16
		MENU
2-1				2-2
(POSITION SET)				(POSITION SET)
	MULTI 16			MULTI 16

•When a camera is moved to a certain position, it will switch display positions with the camera that was previously displayed at that position.

3 ☞Press the MENU button to go to the next menu screen, or

☞Press the EXIT button to exit the menu display.

01	02	03	04	01	02	03	04
05	06	07	08	16	06	07	08
09	10	11	12	09	10	11	12
13	14	15	16	13	14	15	05

Example of switched camera display

01		02	03					04		01						02	03					04
01		02	03					04		01						02	03					04
05		06	07				08							16		06	07				08
05		06	07				08							16		06	07				08
09		10	11				12							09		10	11				12
13		14	15				16			13						14	15				05
13		14	15				16			13						14	15				05

English

43

Contents

English GB Français F Español E About this manual À propos de ce manuel WARNING: CAUTION: REMOTE CONTROLLER CIRCUIT ACTIVE RECORDING AND VIDEO LOSS SETTING EACH CAMERA DISPLAY POSITION About the cooling fan REAR PANEL BASIC CONNECTIONS CONNECTIONS TO THE S-VIDEOTERMINALS [A] RS485 (RJ-11)terminal connection [B] Using the push-lockterminals [C] SENSOR ALARM OUT terminals REMOTE CONTROLLER CIRCUIT CONNECTIONS Live Picture Mode (see page 10) VCR Playback Mode (see page 18) Menu Mode Camera Live Picture Mode Lock VCR Playback Mode Lock Canceling the Security Lock Battery Life Replacing the Battery Press the LIVE button Live picture mode operations steps on monitor Live picture mode operations steps on monitor 2 (see page 17) Live picture mode Press a SELECT (1-16)button Example: To freeze the image from camera Example: To zoom in the image from camera Example: To zoom in the image from camera 4 and set the zoom range Example: To freeze the zoomed in image from camera Automatic sequential full screen display Switching the 4 divisions split screen Automatic sequential 4 divisions split screen display Switching between 16 divisions and 9 divisions split screen display Press the PLUS button Switching between 13 divisions and 6 divisions plus split screen display Example: To display the image from camera 12 in the plus screen area Automatic sequential plus display Example: To display the recorded image from camera 2 in the plus screen area Automatic sequential plus display of recorded pictures TO DISPLAY ON MONITOR 2 THE SAME IMAGE AS ON MONITOR Press the VCR button VCR playback mode operations steps on monitor VCR playback mode operations steps on monitor 2 (see page 17) VCR playback mode Example: To freeze the recorded image from camera Example: To zoom in the recorded image from camera Example: To zoom in the recorded image from camera 4 and set the zoom range Example: To freeze the zoomed in recorded image from camera Page Example: To display the recorded image from camera 12 in the plus screen area Page MENUS DISPLAYS Setting the language (CLOCK SET) (TIMER SET) 2-2~5 TO MAKE CHANGES TO THE SETTINGS Setting the VCR Output VCR SET menu VCR MODE REC SPEED ALARM REC SPEED SERIAL SET menu DATA SPEED ALARM SEND Unit address confirmation Setting the RS232C/RS485 communication BUZZER Changing the Settings MON.1 OUT ALARM SET menu RETRIGGER Setting the SENSOR SET Mode SENSOR SET menu SENSOR ALARM Setting the ACTIVE REC Recording Mode Setting the Video Loss Mode ACTIVE REC SET menu EXT ALARM REC SENSOR REC ACTIVE REC Settings Examples Example 1: Recording on the tape when an alarm trigger is received from camera Setting the Monitor Display MON2 SEQ.MODE MON2 MON1 MON.MASK LIVE Setting the camera title Setting up programmed recording for each camera CAMERA SET menu PROGRAM REC Setting the alarm duration for each camera AL. DURATION Setting the monitor masking for each camera MON. MASK Setting the sequential display interval for each camera SEQUENCE Setting the video loss operation mode Setting the video sensor area position, sensitivity level and response mode Changing a camera position VCR PB CLOCK Setting the clock and title display VCR PB TITLE DISPLAY SET menu LIVE CLOCK Displaying the Alarm Data LIVE PICTURES MODE ALARM Example: Resetting the Alarm RECORDED PICTURES MODE ALARM Alarms recorded on tape External Alarms DATA FORMAT TRANSMISSION PROTOCOL Transmission line: 2 conductors Transmission system: Half duplex SW No RS-232Cexclusive use RS-485exclusive use COMMANDS AVAILABLE FROM THE COMPUTER INFORMATION GATHERING COMMANDS STATUS SENSE(D7) STATUS SENSE(D7) byte assignment (Table 1) ALARM STATUS SENSE(D5) ALARM STATUS SENSE(D5) byte assignment (Table 2) COMMANDS AVAILABLE FROM THE MULTIPLEXER ACK(0A) NAK(0B) COMMAND TABLE (TABLE 4) Page SANYO INDUSTRIAL MULTIPLEXER WARRANTY OBLIGATIONS CUSTOMER INFORMATION Weekdays 8:30 AM – 5:00 PM Pacific Time