Manuals / Brands / Computer Equipment / Network Card / Sanyo / Computer Equipment / Network Card

Sanyo MPX-CD162, MPX-MD162 Setting up programmed recording for each camera, CAMERA SET menu, PROGRAM REC

1 55

Download 55 pages, 1.07 Mb

CAMERA SETTING	Menu 7

Setting up programmed recording for each camera

1 Press the MENU button twice to display the (TIMER SET) menu, then check that the day and night periods are set as desired. (For more information on the day and night periods settings, see “TIMER SET” on page 27.)

2 Press the MENU button once to display the (VCR SET) menu.

Press the l button to highlight the “PROGRAM REC MODE” setting.

3 Using the + (or –) button, set “MODE1” or “MODE2”. (For more information on each mode operation, see “PROGRAM REC MODE” on page 29.)

NOTE: If set to “OFF”,

•Programmed recording will not be possible.

• The (CAMERA SET) menu settings are not displayed.

4 Press the MENU button four times to display the (CAMERA SET) menu.

5 Press the SELECT (1 – 16) button to select the desired camera (ex: camera 5).

6 Press the l button to highlight the “PROGRAM REC” setting.

1Press the + (or –) button to set “ON” in the DAY column, then press the c button.

2Press the + (or –) button to set “ON” in the NIGHT column.

Programmed recording will be conducted according to the “MODE1” or “MODE2” setting entered in the (VCR SET) menu.

7 ☞Press the MENU button to go to the next menu screen, or

☞Press the EXIT button to exit the menu display.

CAMERA SET menu

PROGRAM REC (Default setting: DAY and NIGHT to OFF)

ON: When the time set in the (TIMER SET) menu is reached, the pictures from this camera will be recorded in priority.

OFF: Programmed recording will not be done.

1

(CLOCK SET)

10-15-1999 FRI 15:20:00

	(TIMER SET)
DAYTIME		07:30-19:30
	(DAYLIGHT SET)
MODE			NO USE
		WEEK	MON	TIME
ON	1ST-SUN		04	02:00
OFF	LST-SUN		10	02:00
		MENU

2, 3

	(VCR SET)
VCR MODE					TLS
REC SPEED					2	H
ALARM REC SPEED					2	H
PROGRAM REC MODE					OFF		OFF
COLOR KILLER					OFF
(SERIAL SET)							MODE1
DATA SPEED					19200
ALARM SEND					OFF
ööADDRESS:000öö							MODE2
MENU

4

5, 6

(CAMERA SET) NO.01

(CAMERA SET)

NO.05

TITLE

--------01

TITLE

--------05

DAY

NIGHT

DAY

NIGHT

PROGRAM REC

OFF

OFF

PROGRAM REC

ON

ON

MON.MASK

OFF

OFF

MON.MASK

OFF

OFF

SEQUENCE

1 S

1 S

SEQUENCE

1

S

1 S

VIDEO LOSS

ON

VIDEO LOSS

ON

SENSOR SET : PRESS

NEXT

SENSOR SET : PRESS

NEXT

MENU

5

English

37

Contents

English GB Français F Español E About this manual À propos de ce manuel WARNING: CAUTION: REMOTE CONTROLLER CIRCUIT ACTIVE RECORDING AND VIDEO LOSS SETTING EACH CAMERA DISPLAY POSITION About the cooling fan REAR PANEL BASIC CONNECTIONS CONNECTIONS TO THE S-VIDEOTERMINALS [A] RS485 (RJ-11)terminal connection [B] Using the push-lockterminals [C] SENSOR ALARM OUT terminals REMOTE CONTROLLER CIRCUIT CONNECTIONS Live Picture Mode (see page 10) VCR Playback Mode (see page 18) Menu Mode Camera Live Picture Mode Lock VCR Playback Mode Lock Canceling the Security Lock Battery Life Replacing the Battery Press the LIVE button Live picture mode operations steps on monitor Live picture mode operations steps on monitor 2 (see page 17) Live picture mode Press a SELECT (1-16)button Example: To freeze the image from camera Example: To zoom in the image from camera Example: To zoom in the image from camera 4 and set the zoom range Example: To freeze the zoomed in image from camera Automatic sequential full screen display Switching the 4 divisions split screen Automatic sequential 4 divisions split screen display Switching between 16 divisions and 9 divisions split screen display Press the PLUS button Switching between 13 divisions and 6 divisions plus split screen display Example: To display the image from camera 12 in the plus screen area Automatic sequential plus display Example: To display the recorded image from camera 2 in the plus screen area Automatic sequential plus display of recorded pictures TO DISPLAY ON MONITOR 2 THE SAME IMAGE AS ON MONITOR Press the VCR button VCR playback mode operations steps on monitor VCR playback mode operations steps on monitor 2 (see page 17) VCR playback mode Example: To freeze the recorded image from camera Example: To zoom in the recorded image from camera Example: To zoom in the recorded image from camera 4 and set the zoom range Example: To freeze the zoomed in recorded image from camera Page Example: To display the recorded image from camera 12 in the plus screen area Page MENUS DISPLAYS Setting the language (CLOCK SET) (TIMER SET) 2-2~5 TO MAKE CHANGES TO THE SETTINGS Setting the VCR Output VCR SET menu VCR MODE REC SPEED ALARM REC SPEED SERIAL SET menu DATA SPEED ALARM SEND Unit address confirmation Setting the RS232C/RS485 communication BUZZER Changing the Settings MON.1 OUT ALARM SET menu RETRIGGER Setting the SENSOR SET Mode SENSOR SET menu SENSOR ALARM Setting the ACTIVE REC Recording Mode Setting the Video Loss Mode ACTIVE REC SET menu EXT ALARM REC SENSOR REC ACTIVE REC Settings Examples Example 1: Recording on the tape when an alarm trigger is received from camera Setting the Monitor Display MON2 SEQ.MODE MON2 MON1 MON.MASK LIVE Setting the camera title Setting up programmed recording for each camera CAMERA SET menu PROGRAM REC Setting the alarm duration for each camera AL. DURATION Setting the monitor masking for each camera MON. MASK Setting the sequential display interval for each camera SEQUENCE Setting the video loss operation mode Setting the video sensor area position, sensitivity level and response mode Changing a camera position VCR PB CLOCK Setting the clock and title display VCR PB TITLE DISPLAY SET menu LIVE CLOCK Displaying the Alarm Data LIVE PICTURES MODE ALARM Example: Resetting the Alarm RECORDED PICTURES MODE ALARM Alarms recorded on tape External Alarms DATA FORMAT TRANSMISSION PROTOCOL Transmission line: 2 conductors Transmission system: Half duplex SW No RS-232Cexclusive use RS-485exclusive use COMMANDS AVAILABLE FROM THE COMPUTER INFORMATION GATHERING COMMANDS STATUS SENSE(D7) STATUS SENSE(D7) byte assignment (Table 1) ALARM STATUS SENSE(D5) ALARM STATUS SENSE(D5) byte assignment (Table 2) COMMANDS AVAILABLE FROM THE MULTIPLEXER ACK(0A) NAK(0B) COMMAND TABLE (TABLE 4) Page SANYO INDUSTRIAL MULTIPLEXER WARRANTY OBLIGATIONS CUSTOMER INFORMATION Weekdays 8:30 AM – 5:00 PM Pacific Time