CAMERA SETTING

Menu 7

 

 

Setting the video sensor area position, sensitivity level and response mode

1 Press the SELECT (1 – 16) button to select the desired camera (ex: camera 6).

2 Press the NEXT button.

The live picture from the selected camera and the video sensor setting screen for that camera are displayed.

3 Set the video sensor area position.

1Using the l, j, d and c buttons, move the cursor to the desired position according to the picture in the background.

2Using the + (or –) button, set A or B for the selected point.

Every time the + button is pressed, the setting will change as follows:

A → B → - → A...

Repeat steps 1 and 2 to set all the desired video sensor points of the desired area(s).

•Set the desired point(s) to setting A or B.

•– indicates a sensor point without any setting (there are 10 lines of 16 points each), that is not used as video sensor.

•To erase a line of video sensor points (A or B), move the cursor to the line to erase, then press the MENU RESET button.

4 Set the sensor sensitivity level.

1Using the j (or l) button highlight the “LEVEL DAY” setting.

2Press the c button, then using the + (or –) button set the desired sensitivity level for the “DAY” period.

Follow the same procedure to set the desired sensitivity level for the “NIGHT” period.

The available sensitivity levels are: OFF

1, 2, 3...10 (10 being the least sensitive, default setting), OFF.

NOTE: The sensor sensitivity level can only be checked for the time of the setting. (I.e., the night level setting cannot be checked during the day.)

5 Set the sensor response mode.

1Press the c button to highlight the “MODE” setting.

2Using the + (or –) button set the desired mode.

• MODE A (default setting):

The video sensor will send a trigger when it detects movement at the video sensor area points A.

•MODE A and B:

Set points A and points B at a predetermined distance, so that only large subjects, that are detected by both video sensor points simultaneously send an alarm trigger. Smaller objects that are detected only by one set of video sensor points at the time will not send an alarm trigger.

•MODE A and NB (Fig. 1):

Set the video sensor points A at the centre of the main area, and video sensor points B at the periphery, where no movement will be detected. A trigger will be sent when change is only detected at the video sensor points A, not at the video sensor points B. For example, if the whole screen (A and B) brightness changes due to a change in lighting or sunrays, a trigger is not sent. But, if a change is detected only at the centre of the screen (A), a trigger is sent.

6 ☞Press the NEXT button to return to the (CAMERA

SET) menu display, or

☞Press the EXIT button to exit the menu display.

42

1, 2

 

(CAMERA SET)

NO.06

 

TITLE

--------06

6

NEXT

DAY

NIGHT

 

PROGRAM REC

OFF

OFF

 

MON.MASK

OFF

OFF

 

SEQUENCE

1 S

1 S

 

VIDEO LOSS

ON

SENSOR SET : PRESS NEXT

3-1Sensor point not used

3-2Sensor point A

3-2Sensor point B

- - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - -

- - - - - - A A A A - - - - - -

- - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - -

- - - - - - - - - - - - B B B B

- - - - - - - - - - - - - - - -

LEVEL:DAY†8 NIGHT†10MODE:A

(LEVEL DAY)

4.Sensitivity level for the day period (ex.: 8)

(LEVEL NIGHT)

4.Sensitivity level for the night period (ex.: 10)

(MODE)

5. Sensor response mode

(Fig. 1)

 

- - - - - - -

B B B

- - - - -

B B

 

B

A A A A A

 

A A A A A

 

A A A A A

 

B

 

B B

 

B B B

 

LEVEL:DAY†8 NIGHT†10 MODE:A AND NB

English