ACTIVE RECORDING AND VIDEO LOSS

SETTING

 

Menu 5

 

 

 

(ACTIVE REC SET)

 

(VIDEO LOSS SET)

 

 

 

To set the priority recording mode when an external alarm or video sensor trigger is received.

Setting the ACTIVE REC Recording Mode

1 Press the MENU button 5 times to display the (ACTIVE REC SET) menu.

2 Using the + (or –) button select the desired “EXT ALARM REC” setting, then press the l button.

All the other settings are selected using the same procedure.

3 ☞Press the l button to go to the (VIDEO LOSS SET) menu, or

☞Press the MENU button to go to the next menu screen, or

☞Press the EXIT button to exit the menu display.

2

(ACTIVE REC SET)

EXT ALARM REC

OFF

 

SENSOR REC

OFF

 

REC MODE

MODE2

(VIDEO LOSS SET)

VIDEO LOSS

OFF

DISPLAY

FREEZE

DATA

ON

When the live picture signal feed is interrupted, you can set the action taken (frozen picture or color bars), and if the video loss is recorded as alarm data.

Setting the Video Loss Mode

1 Press the l button to highlight the “VIDEO LOSS” setting.

2 Using the + (or –) button select the desired “VIDEO LOSS” setting, then press the l button.

All the other settings are selected using the same procedure.

3 ☞Press the MENU button to go to the next menu screen, or

☞Press the EXIT button to exit the menu display.

3

(ACTIVE REC SET)

EXT ALARM REC

OFF

SENSOR REC

OFF

REC MODE

MODE2

(VIDEO LOSS SET)

VIDEO LOSS

OFF

 

DISPLAY

FREEZE

DATA

ON

ACTIVE REC SET menu

EXT ALARM REC (Default setting: OFF)

ON: When an external alarm trigger is received, active recording is initiated, the concerned camera pictures being recorded in priority.

OFF: When an external alarm trigger is received, active recording will not be initiated.

SENSOR REC (Default setting: OFF)

ON: When a video sensor trigger is received, active recording is initiated, the concerned camera pictures being recorded in priority.

OFF: When a video sensor trigger is received, active recording will not be initiated.

REC MODE (Default setting: MODE2)

This setting selects the active recording operations.

MODE1: The live pictures from the camera corresponding to the alarm trigger only are recorded.

MODE2: The live pictures from the camera corresponding to the alarm trigger is recorded together with the signal from the other cameras.

Please refer to “ACTIVE REC Settings Examples” on page 34.

NOTE: Programmed recording function will select the camera to record or the camera priority recording normal mode, but the active recording mode will modify the recording mode for that camera when an external alarm or a video sensor trigger is received.

VIDEO LOSS SET menu

VIDEO LOSS (Default setting: OFF)

You can set the action to take when there is an interruption in the video signal feed.

OFF: The video loss will not be active independently of the setting entered for each camera.

INDIV.: The ON/OFF setting will be as set for each of the cameras.

NOTE: If the “INDIV.” setting is used, in the (CAMERA SET) menu, enter the desired setting for each camera (see page 36).

DISPLAY (Default setting: FREEZE)

FREEZE: When there is a video loss, the image just previous to the interruption is frozen on-screen.

TEST: When there is a video loss, color bars are displayed on-screen.

NOTE: • Depending on the timing of the video loss, a complete picture may not be displayed.

•Even if a frozen image is selected for the monitor display, color bars only can be recorded.

DATA (Default setting: ON)

ON: The video losses data is recorded as alarm data.

OFF: The video losses data is not recorded.

NOTE: If the “ON” setting is used, you can review the video losses data (camera number, date, time) in the (ALARM DATA) menu (see page 45).

English

33