Sanyo PLC-XM80L Installation, Lens Shift Adjustment, Positioning the Projector

Installation

Positioning the Projector

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. (for PLC-XM80)

PNote:

•The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image.

•All measurements are approximate and may vary from the actual sizes.

			75.1' (22.9 m)			(Inch Diagonal)
			44.3’(13.5 m)
		33.2’(10.1 m)					400”
					400”	Max. Zoom
		22.0’ (6.7 m)		300”
	10.9’ (3.3 m)
			200”		236”	Min. Zoom
4.3'(1.3 m)
		100”	118”	177”
		59”				(Center)
		40”

Screen Size	40”	100”	200”	300”	400”
(W x H) mm
	610 x 457	2032 x 1524	4064 x 3048	6096 x 4572	8128 x 6096
4:3 aspect ratio
Zoom (max.)	4.3'(1.3 m)	10.9’ (3.3 m)	22.1’ (6.7 m)	33.2’(10.1 m)	44.3’(13.5 m)
Zoom (min.)	7.4'(2.3 m)	18.7' (5.7 m)	37.6' (11.5 m)	56.5' (17.2 m)	75.1' (22.9 m)

Lens Shift Adjustment

Projection lens can be moved from side to side and up and down with the motor-driven lens shift function. This function makes the positioning of images easy on the screen. (See page 27)

The display position	Lens shift adjustable range
can be shifted upward
up to 50% elevation of
the display.
	50%
	The display position can
	be shifted downward up
	to 50% low level of the
	display.
When the lens is shifted to top.	When the lens is shifted to bottom.

10%

The display position can
be shifted to the left in	The display position can
up to 10% width of the
display.	be shifted to the right in
	up to 10% width of the
	display.

Lens shift center position Shift range

When the lens is shifted to leftmost. When the lens is shifted to rightmost.

17