Sanyo PLC-XM80L Logo select

Setting

Display
This function decides whether to display On-Screen Displays.
On ...............................	Show all the On-Screen displays. Use this
	function when you want to project images
	after the lamp becomes bright enough. The
	factory default setting is in this option.
Countdown Off ..........	Show the input image instead of the
	countdown when turning on the projector.
	Use this function when you want to project
	the image as early as possible even when
	the lamp is not bright enough.
Off ...............................	Hide the On-Screen Displays except;
	ü On-Screen Menu
	ü Power off? (p.24)	Logo select
	ü No signal for Power management.
	(p.57)

ü Please wait . . .

üArrows for the True function in the Screen Menu (p.42)

ü P-timer

ü Simple mode

Background

Select the background screen for when no input signal is detected.

Press the Point PQ buttons to switch between each option.

Blue . . . . Project a blue background.

Black . . . Project a black background.

It is invalid when there is no image.

User . . . . Project an image captured in the Logo setting.

Logo (Logo and Logo PIN code lock settings)

This function allows you to customize the screen logo with Logo select, capture, Logo PIN code lock and Logo PIN code change functions.

PNote:

When On is selected in the Logo PIN code lock function, Logo select,

Capture and Logo PIN code change cannot be selected.

Logo select

This function decides on the starting-up display from among following options.

User ..........	Show the image you captured.
Default ......	Show the factory-set logo.
Off .............	Show the countdown display only.

Off

Off

5